background image

Customizing Your Device

36 

Montana 600 Series Owner’s Manual

• 

orientation Lock

—locks the 

screen orientation in portrait or 

landscape mode, or allows the 

screen to change orientation 

automatically based on the device 

orientation.

• 

Screen Capture

—allows you to 

take screen captures on the device.

• 

Battery Save

—saves battery power 

and prolongs the battery life.

• 

Calibrate Screen

page 36

.

Calibrating the Touchscreen

The screen does not normally require 

calibration. However, if the screen does 

not seem to be responding properly, 

calibrate the touchscreen.
1.  Select   > 

Setup

 > 

Display

 > 

Calibrate Screen

.

2.  Follow the on-screen instructions.

Appearance Settings

Select   > 

Setup

 > 

Appearance

.

• 

Mode

—sets a light background 

(

Day

), a dark background (

Night

), 

or automatically switches between 

the two based on the sunrise time 

and the sunset time for your current 

location (

Auto

).

• 

Day Background

—sets the 

background image used in day 

mode.

• 

Night Background

—sets the 

background image used in night 

mode.

• 

Day Highlight Color

—sets the 

color for selections in day mode.

• 

Night Highlight Color

—sets the 

color for selections in night mode.

• 

Landscape Controls

—places the 

controls on the left or right side of 

the screen when in landscape mode.

Summary of Contents for Montana 650







































































Reviews: