Customizing Your Device
Montana 600 Series Owner’s Manual
39
•
Interval
—selects a track log
recording rate. Recording points
more frequently
creates a more-
detailed track, but fills the track log
faster.
•
Auto Archive
—selects an
automatic archive method to
organize your tracks. Tracks are
saved and cleared automatically
based on the user setting.
•
Color
—changes the color of the
track line on the map.
Changing the Units of
Measure
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
1. Select >
Setup
>
Units
.
2. Select a measurement type.
3. Select a unit of measure for the
setting.
Time Settings
Select >
Setup
>
Time
.
•
Time Format
—allows you to
select a 12-hour or a 24-hour
display time.
•
Time Zone
—allows you to select
the time zone for the device. You
can select
Automatic
to set the
time zone automatically based on
your GPS position.
Position Format Settings
NoTe
: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
Select >
Setup
>
Position Format
.
