0
Detailed Operation
Pan
The Pan keys are used to move the display around so you can see beyond the initial boundaries of the screen.
The
PAN
function key is one of the “smart” keys available at the bottom of the screen. When you select the
Pan function, four “arrow” keys appear on the right side of the screen next to the
MENU ItEM
keys. Move the
map in the desired direction by pressing the
MENU ItEM
key next to the arrow that shows you want the map
to move. Press the
PAN
key again to exit the Pan mode. While panning, a green reference line is drawn from
the center of the viewed area back to your current position.
Info
Press the
INFO
“smart” key to toggle viewing of
information about the current “TO” waypoint.
Press the
INFO
key again to hide the information.
Each press of the
key will step through the
available information for the current destination
waypoint. The number of pages depends on the
amount of information about the destination
waypoint. Press the
Wx
key to view any available
METARs for the selected waypoint. Note that
not all airports will have METARs available. The
Wx
key is available with the WSI and UAT FIS
sensors.
Runway diagrams of airports will be displayed in
the same orientation as the main map (i.e., North
Up, Track Up, or DTK Up).
Custom Map
Info page 1
Info page 2
Info page 3
Info page 4
Info Weather
Panning Controls
Summary of Contents for MX20
