Set Baro Correction
You may enter the corrected barometric pressure so that
the proper pressure altitude will be displayed.
1. Press the
LINE SELECT
key for Set Baro Correction.
2. The Function “smart” keys at the bottom of the display
will have direction arrows above them. Press the
UP/DOWN
arrow keys to change the value of the
highlighted number. Press the
LEFT/RIGHT
arrow keys
to move to another number.
3. Press
MENU/ENTER
to save the changed values and
leave the Set Baro Correction option.
Display Latitude/Longitude Lines
Use this option to choose to display or not display Lat/Lon
lines on the map displays.
Initial En Route Zoom and Initial Ground Zoom
Transition Speed
A zoom scale auto-transition point is supported that helps
to reduce the pilot workload by automating the selection
of the zoom scale based on the phase of flight. The two
transitions are:
·
Ground-to-Air mode
(Takeoff)
·
Air-to-Ground mode
(Landing)
When the aircraft transitions from Ground-to-Air, the
zoom scale is automatically set to a user selected “en
106
Detailed Operation