Traffic
The Traffic option turns the display of traffic information
on or off. ADS-B Traffic information includes the
location and identifier of a reporting aircraft, its direction
of travel, elevation, and the estimated path for the selected
time interval. See the section on the Traffic mode for more
details on how traffic information is used.
For Skywatch/TCAD/GTX330 installations, a small
thumbnail presentation of traffic is presented in the upper
left corner of the display. In TCAD, Skywatch, and
GTX330 installations, the traffic targets can also be
overlaid on the Custom Map page.
The Traffic function is not available in all software
versions.
Check
your
Approved
Flight
Manual
Supplement to verify if this feature is available. Review the
Limitations section on page iv.
Strikes
The Strikes menu option controls the display of lightning
strike information if the MX20 receives strike data from
an external source, such as the WX500. Each reported
lightning strike is shown as a red “x” on the display.
Strikes are not shown if the zoom level is below 20 nm.
Press the Next Page
LINE SELECT
key to display the next
page of menu items.
36
Detailed Operation
