Getting Started
This section explains how to get started using the MX20.
Information in this section describes the controls, data
card, display, and basic operation. After reading this
section, go to the Detailed Operation section for expanded
explanations for each feature.
Functions
The MX20 contains thirteen major separate functions for
the display of information. The function names are shown
as “smart” keys at the bottom of the display. The “smart”
key is the combination of a label above a triangle key at
the bottom of the display. The labels above the triangle
keys change to reflect the choices available to you for each
function. Press the
FN
key to show the available functions.
Press the “smart” key below the function label to go to the
desired function. While in each function, press the
MENU/ENTER
key to show the options for each function.
The options are shown on the right side of the display.
Press the
LINE SELECT
key to manipulate the options.
Some options toggle on/off, while some are tri-state (three
choices). The functions are:
·
MSG - Message Log (See page 20)
·
MAP - Custom Map (See page 21)
·
IFR - IFR Chart (See page 37)
·
VFR - VFR Chart (See page 41)
·
Split - Split Screen (See page 43)
·
Traffic - Skywatch/TCAD (See page 45)
·
Traffic - ADS-B TRAF (See page 50)
·
Traffic - TIS-A (See page 59)
·
FPL - Flight Plan (See page 63)
·
TER - Terrain (See page 64)
·
FIS-B - Flight Information Service - Broadcast
UAT (See page 69)
1
Getting Started
