Custom Map (MAP) Function
The Custom Map function provides a graphic display of
map features in relation to the aircraft location to help
improve
your
situational
awareness.
Review
the
Limitations section on page iv that apply to the use of data
displayed on the moving map. The custom map function
is unique in that it has the ability to selectively “overlay”
all available types of information onto a single display.
You can customize the map display by overlaying
information selected from a menu of options. Press the
MENU
key to display a list of options on the right side of
the screen. Press the
LINE SELECT
key next to the
displayed option. Repeated presses of the
LINE SELECT
key will scroll through the available selections for each
option.
The “smart” keys at the bottom of the display over the
function keys control the map scale by zooming in or out,
moving the map view around with the Pan feature, and
viewing Info about the current destination waypoint.
Map Scale
The In and Out function keys control the map scale by
zooming in and out. You can zoom in to 0.25 nm and
zoom out to 250 nm. The scale distance is measured from
the location of your aircraft symbol to the top of the
screen. The Map Scale is shown in the lower left corner of
the screen. The map orientation appears above the map
scale on one of the three Nav Data options.
21
Detailed Operation
Zoom Level
Map Orientation
