Each press of the
¤
key will step through the available
information for the current destination waypoint. The
number of pages depends on the amount of information
about the destination waypoint. Press the
WX
key to view
any available METARs for the selected waypoint. Note
that not all airports will have METARs available.
Runway diagrams of airports will be displayed in the same
orientation as the main map (i.e., North Up, Track Up, or
DTK Up).
Info In Pan Mode
The
INFO
smart key supports operation in conjunction
with the PAN feature.
On any of the maps (Custom Map, IFR and VFR),
entering the INFO mode while pan is active, will show
information about the nearest airport to the center of the
screen. This allows panning around the immediate area
and obtaining information about airports in the vicinity
without changing the current “TO” waypoint.
While in this mode, only the
INFO
smart key is
highlighted. The
PAN
key is highlighted when exiting the
Info mode. Only information about airports can be
obtained with this feature.
24
Detailed Operation
