Mount Your zūmo in an Automobile
1. Plug the automotive power cable into the connector on the right side of the cradle.
2. Remove the clear plastic from the suction cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
3. Place the suction cup on the windshield.
4. Flip the lever back, toward the windshield.
Warning:
Do not use
the suction cup mount on a
motorcycle.
Suction cup
mount
5. Snap the cradle onto the suction cup arm.
6. Fit the bottom of your zūmo into the cradle.
7. Tilt the zūmo back until it snaps into place.
8. Plug the other end of the automotive power cable into a power outlet.
9. If you are using a traffic receiver in Europe, secure the antenna on the traffic
receiver to the windshield using the suction cups.
© 2008 Garmin Ltd. or its subsidiaries
Garmin
®
and zūmo
®
are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and
other countries.
These trademarks may not be used without the express permission of Garmin. Other
trademarks and trade names are those of their respective owners.
January 2009
Part Number 190-01026-02 Rev. A
Printed in Taiwan
Before mounting the zūmo, see the
Important Safety and Product Information
guide in the product box
for information about laws pertaining to windshield mounting.
Before mounting the zūmo, see the
Important Safety and Product Information
guide in the product box
for information about laws pertaining to windshield mounting.
Warning
: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
Warning
: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
Cradle
Automotive
power cable
Microphone
jack (2.5 mm)
Release button
Cradle
Automotive
power cable
Microphone
jack (2.5 mm)
Release button
