16
Section 2
Getting
Started
Tour
To Adjust Volume
The Zoom/Volume keys can be used to adjust the
ringer, beeper, and speaker volume on any page (other
than the GPS map and highway pages). Pressing these
keys will cause a pop-up menu to appear, showing sliding
indicators for each volume control. Each field must be
selected prior to changing volume settings.
1. Press a
ZOOM/VOLUME
key. When the pop-up
menu first appears the appropriate field is in edit
mode:
beeper
(no call),
ringer
(when phone is
ringing), and
speaker
(during a call).
2. Using the left and right arrow keys, move the
indicator to the left for less volume and to the right
for more volume.
3. To highlight a different field, use the up/down arrow
keys. Use left and right arrow keys to move the
indicator. Press
QUIT
to end or press no keys and
allow to time-out.
The volume levels are different when the unit is in the
airplane and car cradles. Volume is adjusted in the
appropriate cradle in exactly the same way, but can only
be done when in said cradle. When placed in the cradle,
the volume setting will return to the former level for that
cradle.
To Adjust Backlighting
The NavTalk Pilot’s three-level backlighting is
controlled with the
PWR
key and may be adjusted at any
time, from any page.
To turn the backlighting on:
1. Press
PWR
repeatedly until the backlighting is at
the desired level (off, 1, 2, or 3). Extended press of
the
PWR
key will shut the unit off.
Zoom/Volume
Keys
Power
Key/
Backlighting
Adjustment
Volume Adjustment
Pop-Up
