80
Section 6
GPS Receiver
Reference
To turn the data fields off, highlight ‘Data
Fields Off’ and press ENTER.
The next two options allow you to select either two
(default) or four data fields at the top of the map screen.
Change fields—
Similar to the Position Page, this
feature allows you to choose the data displayed on four user-
selectable data fields. There are thirty-three available data
types, including Average (AVG) Speed, Bearing, Distance, ETA
to Destination (DEST), Speed, Time to Destination, Track, a
Trip Odometer, plus others. See section 7 for a description of
navigation terms.
To change a data field:
1. Highlight ‘Change Fields’ and press
ENTER
.
2. Highlight the data field you wish to change and
press
ENTER
.
3. Select the type of data you want to appear on this
field and press
ENTER
.
MapSource Info—
shows the number of maps
downloaded from the optional MapSource software
package and the amount of memory used (in kilobytes).
MapSource allows you to supplement the built-in map
with additional detail, including residential streets.
Each downloaded map is described by name, and
may be deselected if you wish to retain the map in
memory, but not display the data on the Map Page. When
a MapSource file is selected, the boundary for any
downloaded map is shown on the Map Page as a gray
shaded outline.
To display the MapSource Info Page:
1. Highlight ‘MapSource Info’ and press
ENTER
.
2. Use the
ARROW
keypad to scroll through the list of
downloaded maps.
3. To select/deselect a map, highlight the box to the
immediate left of the desired map. Press
ENTER
to
select/deselect the map. The map is selected and
will be displayed on the Map Page when an “X”
appears in the box adjacent to that map.
‘Map Setup’ allows you to
change map orientation,
background map detail,
on-screen Jeppesen data,
text size, etc.
Full-screen map display
