Step 1: Mount the nüvi
To mount the nüvi using the suction
cup mount:
1. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Cradle
Power cable
2. Clean and dry your windshield with a lint-
free cloth. Remove the clear plastic from
the suction cup. Place the suction cup on
the windshield.
3. Snap the cradle onto the suction cup
arm.
4. Flip the lever back, toward the
windshield.
Suction cup mount
5. Fit the bottom of your nüvi into the
cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically
if it is plugged in and the vehicle key is
turned to the ON/ACC position.
Step 2: Configure the nüvi
To turn on your nüvi, connect the power
cable to the unit and plug the other end
of the power cable into a power outlet in
your vehicle. Turn your vehicle key to the
ON/ACC position, and your unit should
turn on automatically. Follow the on-screen
instructions.
