1. Connect the small end of the A/V adapter
cable to the A/V IN connector on the right
side of the cradle.
2. Connect the red, white, and yellow
connectors to the corresponding plugs on
your video device.
3. Apply external power to the video device,
if necessary. Turn on the video device.
4. Touch
Yes
to switch to the video. To
automatically switch to the video when
you connect an external video source,
open the Menu page and touch
Tools
>
Settings
>
Video Input
.
nOte:
To return to the Video Input page
while a video is playing, touch anywhere
on the screen.
nOte:
There will be black lines around
the video image.
Caring for Your nüvi
Your nüvi contains sensitive electronic
components that can be permanently
damaged if exposed to excessive shock or
vibration. To minimize the risk of damage
to your nüvi, avoid dropping your unit and
operating it in high-shock and high-vibration
environments.
Cleaning the nüvi
The nüvi is constructed of high-quality
materials and does not require user
maintenance other than cleaning. Clean
the outer casing of the nüvi (not the touch
screen) using a cloth dampened with a mild
detergent solution, and then wipe it dry.
Avoid chemical cleaners and solvents that
can damage plastic components.
Cleaning the Touch Screen
Clean the touch screen with a soft, clean,
lint-free cloth. Use water, isopropyl alcohol,
or eyeglass cleaner, if needed. Apply the
liquid to the cloth, and then gently wipe the
touch screen.
A/V IN
connector
