background image

4-9

·

Enter the distance from the reference to the desired waypoint location.
The GPS 100 will display the resulting latitude and longitude.

·

With the cursor over “OK?”, press the ENT key.

4.7 NEAREST WAYPOINTS

NEAREST WAYPOINT MENU

An important feature of the GPS 100 is the ability to display waypoints
nearest to your position.  In an emergency, you may use the nearest waypoint
feature to find the closest point of safety in your area.  Up to 9 waypoints,
closer than 200 nm, are computed for each type of waypoint.  To view a
specific waypoint type, place the cursor over the desired type and press the
ENT key.

Total

Rank

Nearest Waypoints

    Waypoint Type

Name

Bearing & Range from present position

NEAREST WAYPOINT PAGE

The Nearest Waypoint Page displays 3 waypoints at a time.  Additional
waypoints can be viewed by “scrolling” through the nearest waypoint list.  The
total number of nearest waypoints is displayed in the upper right corner of the
page.

To scroll through the nearest waypoints...

·

Place the cursor over the waypoint name on line 3 and press the right
arrow key to scroll down the list.

Summary of Contents for Personal Navigator GPS 100AVD


























































































































Reviews: