Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1
Hold
UP
.
2
Select
Settings
>
Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select
Auto Climb
>
Status
>
On
.
5
Select
Run Screen
to identify which data screen appears
while running.
6
Select
Climb Screen
to identify which data screen appears
while climbing.
7
If necessary, select
Invert Colors
to reverse the display
colors when changing modes.
8
Select
Vertical Speed
to set the rate of ascent over time.
9
Select
Mode Switch
to set how quickly the device changes
modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1
Hold
UP
.
2
Select
Settings
>
Apps
.
3
Select an activity.
NOTE:
This feature is not available for all activities.
4
Select
Auto Scroll
.
5
Select a display speed.
UltraTrac
The UltraTrac feature is a GPS setting that records track points
and sensor data less frequently. Enabling the UltraTrac feature
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold UP, select
Settings
>
Apps
, and select an activity.
Select Power Save to adjust the timeout settings for the activity.
Normal
: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended
: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap or a rest
during an activity using LAP. You can turn off the Lap Key
setting to avoid recording laps due to accidental key presses
during an activity.
1
Hold
UP
.
2
Select
Settings
>
Apps
.
3
Select an activity.
4
Select
Lap Key
.
The lap key status changes to On or Off based on the current
setting.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must
install a watch face from the Connect IQ store (
).
You can customize the watch face information and appearance,
or activate an installed Connect IQ watch face.
1
Hold
UP
.
2
Select
Settings
>
Watch Face
>
Type
.
3
Select an option:
• To activate the pre-loaded digital watch face, select
Digital
.
• To activate the pre-loaded analog watch face, select
Analog
.
• To activate an installed Connect IQ watch face, select the
name of the installed watch face.
4
If using a pre-loaded watch face, select an option:
• To change the background color, select
Background
Color
.
• To add or change an accent color for the digital watch
face, select
Accent Color
.
• To change the style of the digits for the digital watch face,
select
Layout
.
• To change the style of the hands for the analog watch
face, select
Hands
.
• To change the style of the numbers for the analog watch
face, select
Background
.
• To change the data that appears on the watch face, select
Additional Data
.
5
Select
UP
or
DOWN
to preview the watch face options.
6
Select
START
to save the selection.
Customizing the Widget Loop
You can show, hide, or move items in the widget loop.
1
Hold
UP
.
2
Select
Settings
>
Widgets
.
3
Select a widget.
4
Select an option:
• Select
Status
to show or hide the widget from the widget
loop.
• Select
Move Up
or
Move Down
to change the location of
the widget in the widget loop.
Sensors Settings
Compass Settings
Hold UP, and select
Settings
>
Sensors
>
Compass
.
Calibrate
: Allows you to manually calibrate the compass sensor
(
).
Display
: Sets the directional heading on the compass to letters,
degrees, or milli-radians.
North Ref.
: Sets the north reference of the compass (
).
Mode
: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
16
Customizing Your Device
