Starting a Race
Before you can view the time to burn, you must set the starting line (
Setting the Starting Line, page 7
).
1 From the watch face, press START.
2 Select Sail Race.
3 Wait while the watch locates satellites.
The screen displays the regatta timer and time to burn .
4 If necessary, hold MENU, and select an option:
• To set a fixed timer, select Regatta Time > Fixed, and enter a length of time.
• To set a start time within the next 24 hours, select Regatta Time > GPS, and enter a time of day.
5 Press START.
6 Press UP and DOWN to synchronize the regatta timer with the official race countdown.
NOTE: When the burn time is negative, you will arrive at the start line after the race starts. When the burn
time is positive, you will arrive at the start line before the race starts.
7 Press START to start the activity timer.
Tides
Viewing Tide Information
WARNING
Tide information is for information purposes only. It is your responsibility to heed all posted water-related
guidance, to remain aware of your surroundings, and to use safe judgment in, on, and around the water at all
times. Failure to heed this warning could result in serious personal injury or death.
You can view information about a tide station, including the tide height and when the next high and low tides will
occur. You can save up to ten tide stations.
1 From the watch face, press START.
2 Select Tides.
8
Marine Activities
