Trolling Motor Remote
Pairing Your Watch and Trolling Motor
You can pair your watch with a Garmin trolling motor and use it as a remote control. For more information about
using a remote control, see your trolling motor owner's manual.
1 Turn on the trolling motor.
2 Bring the watch within 1 m (3 ft.) of the display panel on the trolling motor.
3 On the watch, press START, and select Trolling Motor.
TIP: If necessary, you can pair your watch with another trolling motor (
Pairing Your Wireless Sensors,
).
4 On the trolling motor display panel, press three times to enter pairing mode.
on the trolling motor display panel illuminates blue as it searches for a connection.
5 On the watch, press START to enter pairing mode.
6 Verify that the passkey shown on your trolling motor remote control matches your watch.
7 On the watch, press START to confirm the passkey.
8 On the trolling motor remote control, press to confirm the passkey.
on the trolling motor display panel illuminates green when the connection to your watch is successful.
Boat Data
Streaming Boat Data
You can stream data fields from your compatible chartplotter to your quatix device. The device displays up to
three data fields per page, and up to six pages of data.
1 From the watch face, select START > Boat Data.
2 Bring your quatix device within 3 m (10 ft.) of the chartplotter.
3 Set the chartplotter to enter pairing mode.
See your chartplotter owner's manual for more information.
4 If necessary, on the quatix device, select START to modify a data page.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is
open on the watch. If you need to pair with another chartplotter, in the boat data app, hold MENU and select Pair
New.
Marking a Waypoint on Your Chartplotter
You can mark a waypoint on your compatible chartplotter using your quatix device.
1 From the watch face, select START > Boat Data.
2 Select START > Mark Plotter Wpt.
12
Marine Activities
