7
Pr
eliminary
Radio Page
The Radio Page Options Menu provides the following:
Setup Radio, Setup Scanlist, Turn Radio Off/On and
Turn GPS Off/On.
To access the page Options Menu:
1. Highlight the Option Menu on-screen button at the
top of the display screen and then press IN on the
CLICK STICK
to open the menu.
2. Highlight the desired option on the menu and then
press IN on the
CLICK STICK
to activate the option.
3. To close without making a selection, move the
CLICK STICK
to the right.
Setup Radio - Overview
The ‘Setup Radio’ option displays the Radio Setup
Page. This page determines how the radio will function,
changes audible alerts and enables you to adjust the radio
operation to your needs.
Setup Radio - Options
The following options are available:
Call Tone -
When the
CALL
button is pressed, an atten-
tion tone is transmitted. This option allows you to choose
from one of ten tones.
Roger Tone -
When the
TALK
key is released, a tone is
sent to signify the end of the transmission. This option
allows you to choose from one of four tones, or set the
tone to ‘Off’.
Ring Tone -
When an incoming transmission is received,
an attention tone will sound. This option allows you to
choose from one of ten codes, or set the tone to Off. The
Ring tone will not sound again until there has been 45
seconds of radio inactivity.
Vibrate -
Choose from ‘On’ or ‘Off’ to have the unit
vibrate when an incoming transmission is received. Once
received, the unit will not vibrate again until there has
been 45 seconds of radio inactivity.
Headset Type -
Allows you to choose which accessory
headset or microphone you are using with the unit, or
have the unit automatically detect the type. If using more
than one type of headset or microphone, you will need
If the headset has a PTT
(Push To Talk) button, this
must be pressed in order for
the unit to detect the headset.
Setup Radio
Radio Page Options Menu
Radio Setup Page
190-00284-00_Prelim_FCC.indd 7
9/18/2003, 3:50:50 PM
