32
Rino 600 Series Owner’s Manual
Customizing Your Device
Position Format Settings
note
: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
Select
Setup
>
Position Format
.
•
Position Format
—sets the position
format in which a given location
reading appears.
•
Map Datum
—sets the coordinate
system on which the map is
structured.
•
Map Spheroid
—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
Heading Settings
You can customize the compass
settings.
Select
Setup
>
Heading
.
•
Display
—sets the type of
directional heading on the compass.
•
north Reference
—sets the north
reference of the compass.
•
Go to Line/Pointer
—allows you
to select how the course appears.
◦
Bearing
(
Small
or
Large
)—the
direction to your destination.
◦
Course
(
CDI
)—your
relationship to a course line
leading to a destination.
•
Compass
—switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time (
Auto
), or turns the
compass off.