Rino 600 Series Owner’s Manual
9
Radio
Monitoring for activity
You can monitor a single channel for
any activity, including static and weak
voice signals. This is helpful if a signal
is going out of range.
Select
Radio
>
Monitor
.
Radio Settings
Select >
Setup Radio
.
•
Send Location
—enables you to
send your current location after
•
Allow Polling
—enables polling.
Polling allows another Rino user to
get your location by sending a poll
request.
•
Power Level
—adjusts power level
on GMRS frequencies.
•
Weather Alert
—allows you to
search for weather alerts on the
current channel or all available
channels.
•
Squelch tone Mode
:
◦
CtCSS
—Continuous Tone
Controlled Squelch System
allows you to ignore unwanted
calls from persons using the
same channel.
◦
DCS
—Digital-Coded Squelch
allows you to ignore unwanted
calls from persons using the
same channel.
•
Repeater Channel
—enables the
GMRS repeater channels 15R-22R.
GMRS repeater channels are
not available on devices sold in
Canada. Position reporting is not
allowed by the FCC on repeater
channels.
•
Headset type
—allows you to
select the type of headset you are
using. To purchase accessories, go
to
your Garmin dealer.