background image

10 

Rino 600 Series Owner’s Manual

Radio

• 

Vox Level

—Voice operated 

transmission controls the sensitivity 

level of any Vox accessory. 

about Contacts

The first time a signal is received from 

another Rino user, the new contact 

page appears. From that page, you 

can show their location on the map, 

navigate to their location (

page 21

), or 

add them to your contacts list. 

adding a New Contact

When a new contact signal is received, 

the new contact page appears. 

Select 

oK

 to save the contact.

Editing Contacts

1.  Select 

Contacts

.

2.  Select a contact.
3.  Select an item.
4.  Select  .

Viewing Contacts on the Map

1.  Select 

Contacts

.

2.  Select a contact.
3.  Select 

View Map

.

Notes

note

: Notes transmit to all users on 

your current channel and code.
You can send notes to other Rino users 

on your current channel and code. You 

can review previously received notes 

from your contacts. You can edit and 

save favorite notes to quickly send 

them later.

Creating a Note

1.  Select 

notes

 > 

<Send note>

 

<new 

note>

.

2.  Write the note.

The maximum character limit is 13.

3.  Select  .
4.  Select an option:

Summary of Contents for Rino 600





























































Reviews: