34
Rino 600 Series Owner’s Manual
Customizing Your Device
Calibrating the Barometric
altimeter
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
1. Select
Setup
>
Altimeter
.
2. Select
Altimeter Calibration
.
3. Follow the on-screen instructions.
Geocache Settings
Select
Setup
>
Geocaches
.
•
Geocache List
—allows you to
display the geocache list by names
or codes.
•
Found Geocaches
—allows you
to edit the number of geocaches
found. This number automatically
increases as you log a find.
•
Filter
—filters a geocache list for
certain factors, such as level of
difficulty.
•
chirp
™
Searching
—turns on or off
chirp searching. A chirp is a small
accessory that you can program and
leave in a geocache.
•
Program chirp
™
—programs the
chirp accessory. See the
chirp
Owner’s Manual
at
Routing Settings
Select
Setup
>
Routing
.
•
Guidance Method
—sets the
calculation and guidance method
for your routes.
◦
off Road
—calculates point-to-
point routes.
◦
on Road For time
—calculates
on-road routes that require
minimal time to drive.
◦
on Road For Distance
—
calculates on-road routes that
are shorter in distance.