Rino 600 Series Owner’s Manual
19
Navigation
Map
represents your location on the map.
As you travel, the
moves. When you
are navigating to a destination, your
route is marked with a magenta line.
To customize the map settings, see
. To customize the map
dashboard and data fields, see
.
Using the Map
You can use the map to navigate an
active route.
1. Select
Map
.
2. Follow the magenta line to your
destination.
Compass
The device has a 3-axis compass. You
can use a bearing pointer or a course
pointer to navigate to your destination.
To customize the compass settings, see
.
Calibrating the Compass
notice
Calibrate the electronic compass
outdoors. Do not stand near objects that
influence magnetic fields, such as cars,
buildings, or overhead power lines.
You should calibrate the compass after
moving long distances, experiencing
temperature changes, or changing the
batteries.
1. From the compass page, touch and
hold the middle of the compass.
2. Follow the on-screen instructions.
Navigating with the Bearing
Pointer
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving.
1. Begin navigation to a destination
(