28
Rino 600 Series Owner’s Manual
Customizing Your Device
3. Select a dashboard.
System Settings
Select
Setup
>
System
.
•
GPS
—sets the GPS to
normal,
WAAS/eGnoS
(Wide Area
Augmentation System/European
Geostationary Navigation Overlay
Service), or
Demo Mode
(GPS
off). For information about WAAS,
•
Language
—sets the text language
on the device.
note
: Changing the text language
does not change the language of
user-entered data or map data, such
as street names.
•
Battery type
—allows you to select
the type of battery you are using.
•
Interface
—sets the format of the
serial interface:
◦
Garmin Spanner
—allows
you to use the USB port with
most NMEA 0183-compliant
mapping programs by creating a
virtual serial port.
◦
Garmin Serial
—Garmin
proprietary format used to
provide PVT protocol data.
◦
nMeA In/out
—provides
standard NMEA 0183 output
and input.
◦
text out
—provides simple
ASCII text output of location
and velocity information.
◦
RtCM
—Radio Technical
Commission for Maritime
Services allows the device
to accept DGPS Differential
Global Positioning System
information from a device
supplying RTCM data in an
SC-104 format.