Road Tech
™
zūmo 665 Owner’s Manual
53
Appendix
Removing the Road
Tech
™
zūmo and Mounts
To remove the zūmo from the
cradle on both the suction cup and
motorcycle mounts, press the button
on the side of the cradle, and tilt the
zūmo forward. Place the weather cap
on the motorcycle mount cradle.
To remove the cradle from the suction
cup mount, turn the cradle to the right
or the left. Apply pressure until the
socket on the cradle releases the ball
on the mount.
NoTe:
Reconnecting the cradle to the
suction cup mount requires significant
force. Press the ball end firmly into the
socket.
To remove the suction cup mount from
the windshield, flip the lever toward
you. Pull the tab on the suction cup
toward you.
Caring for Your road
Tech zūmo
Your zūmo contains sensitive
electronic components that can be
permanently damaged if exposed to
excessive shock or vibration outside
normal motorcycle or automobile use.
To minimize the risk of damage to
your zūmo, avoid dropping your unit
and operating it in extreme high-shock
and high-vibration environments.
Cleaning the Casing
The zūmo is constructed of high-
quality materials and does not require
user maintenance other than cleaning.
Clean the outer casing (not the
touchscreen) using a cloth dampened
with a mild detergent solution,
and then wipe dry. Avoid chemical
cleaners and solvents that can damage
plastic components.
Cleaning the Touchscreen
Clean the touchscreen with a soft,
clean, lint-free cloth. Use water,
isopropyl alcohol, or eyeglass
cleaner, if needed. Apply the liquid
to the cloth, and then gently wipe the
touchscreen.
Protecting Your zūmo
Do not
store the zūmo where
prolonged exposure to extreme
temperatures can occur, because it
can cause permanent damage.
•
Summary of Contents for Road Tech Zumo 665
Page 1: ...ZŪMO 665owner s manual TM ...
