Garmin RV-BBT602, Installation Instructions

4

Connect the adapter cable to the CAN 1 port on the back of 

the stereo dock.

5

Connect the cable from the NRX remote control network to 

the adapter cable.

6

Select an option:
• If the NRX remote control network connects to an 

additional power source, continue with the dock 

installation.

• If the NRX remote control network does not connect to an 

additional power source, proceed to the next step.

7

Turn on the stereo.

8

On the stereo, from the music player, select   > 

Settings

 > 

NRX Power

.

When the check box is filled, the dock supplies power and 

data to the connected NRX remote controls.

Dock Installation

You must use the included bracket to install the device dock into 

a specific vehicle type.
The product package includes the hardware required to attach 

the bracket to the dock. The product package does not include 

the hardware to attach the bracket to the dashboard or the 

dashboard panel.

Installing the Bracket for FIAT

™

 Ducato Vehicles

You should use the included screws to attach the bracket to the 

dock.

1

Place the upper half of the bracket 

À

 on the dock 

Á

, aligning 

the holes in the bracket with the holes on the top of the dock.

2

Using the included screws 

Â

, secure the bracket to the top of 

the dock.

3

Repeat this procedure for the lower half of the bracket 

Ã

.

Preparing a FIAT Ducato Dashboard for Installation

The dashboard in a FIAT Ducato must be modified to support a 

double-DIN stereo.

1

If necessary, remove the dashboard panel or components to 

reach the stereo mounting location.

2

Using a utility knife or similar tool, remove the plastic 

mounting posts in the center of the stereo mounting location 

À

.

Installing the Dock in a FIAT Ducato Dashboard

Before you can install the dock in the dashboard, you must 

install the bracket on the dock.
The product package does not include the screws required to 

fasten the dashboard bracket to the dashboard.
The product package includes the screws required to fasten the 

dock bracket to the dashboard bracket.

1

Place the upper dashboard bracket 

À

 on the dashboard 

Á

, 

aligning the holes on the bracket with the holes in the 

dashboard.

2

Secure the upper dashboard bracket to the dashboard using 

screws

Â

 (not included).

3

Repeat this procedure for the lower dashboard bracket 

Ã

.

4

From inside the dashboard, connect all necessary cables and 

wires to the dock.

5

Place the dock in the dashboard, and connect the dock 

bracket 

Ä

 to the dashboard bracket 

Å

 using the included 

screws 

Æ

.

6

Place the bezel 

Ç

 on the front of the dock.

Magnets hold the bezel in place.

Specifications

RV-BBT602 Series Remote Specifications

Operating 
temperature range

From -20° to 60°C (from -4° to 140°F)

Charging 
temperature range 
(vehicle power)

From 0° to 40°C (from 32° to 104°F)

2