User’s manual maps + more
- 28 -
Voice command
6
Voice command
Note:
The
Voice command
function is not available in every language.
For languages in which this function is available, the Voice command
button is shown in the
N
AVIGATION
window. For languages which are
not supported, the Voice command button is replaced by the Show map
button.
Many functions of your navigation device can be called up conveniently
by voice command.
6.1
Activating the voice commands function
The voice commands function is automatically active in many windows.
This applies in particular to windows in which you are expected to
provide an answer, for example when there is a new traffic message
concerning your route.
6.2
Use voice command
When the functions in a window can be called up by voice command,
this is indicated in the top left corner of the window by the symbol
(
Voice command active
).
A single signal tone and the symbol
(
Speak
) indicate that the
navigation system is waiting for your voice command.
►
Say a command.
The positive acknowledgement tone sounds (two high-pitch tones)
and the function is executed.
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
►
Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say Help" will appear.
Note:
Navigation instructions, warnings and the media player are muted
for as long as the navigation device expects to receive voice commands
from you.
