c330 Owner’s Manual
23
A
PPENDIX
Mounting Your c330
If you do not want to mount the c330 to your vehicle’s windshield,
use the enclosed disk to mount your unit to the dashboard.
Important:
The
permanent
mounting adhesive is extremely
difficult to remove after it is installed.
Safely mount your unit. See page 33 for warnings.
Adjusting the Backlight Brightness
Touch the brightness icon to access the
Set Brightness
page.
You can adjust brightness levels of the backlight by touching the
lightbulb icons shown above. Touch - to dim the backlight or + to
increase the brightness. When you are finished, select
OK
.
To mount the disk:
1. Clean and dry the area on
your dashboard where the
disk is to be placed.
2. Remove the backing from
the permanent mounting
adhesive on the bottom of
the disk, and place the disk
on the dashboard.
3. Place the c330 (that is still
mounted to the suction cup
mount) on top of the disk.
Secure the suction cup
mount to the disk, following
the instructions included in
your Setup Guide.
Disk
Suction cup mount