Reference
57
Editing an Existing Route
5. Press the
ENTER
key.
6. If you selected a route line to insert a new turn, use the
ROCKER
keypad to “drag” the route
line to the point where you want to insert a new turn (top right picture) and press the
ENTER
key.
If you selected a turn to view or edit it (middle right picture), you now have the choice to
Review
,
Remove
, or
Move
the waypoint, or move the panning arrow to the Next waypoint.
Highlight your choice and press the
ENTER
key.
7. Repeat steps 4-6 as necessary to modify the route.
8. When you have completed your route editing, press
the
PAGE
key. The ‘Route Reviewed’ box is shown
with the route name (bottom right picture).
9. If you wish to change the name of the route,
highlight the name and press the
ENTER
key to edit.
When ready to use the route for driving guidance,
highlight
Start Navigation
andpress the
ENTER
key.
For detailed information, refer to the “Driving on a Route” section, page 60.
If you wish to go back and further edit the route, highlight
Edit
and press the
ENTER
key.
If you wish to approve the route without using it for driving guidance, highlight
OK
and press
the
ENTER
key.
Inserting a New Turn
Reviewing or Editing a Turn
“Route Reviewed” Box
Additional Information
If after changing the route name, you would like to return to the name the StreetPilot automatically
assigned, edit the ‘Name’ field, press the
LEFT
area of the
ROCKER
keypad to clear the name, and
then press the
ENTER
key.