background image

Saving the Active Track

The track currently being recorded is called the active track.
Select User Data > Tracks > Save Active Track.
Select an option:

• Select the time the active track began.
• Select Entire Log.

Viewing a List of Saved Tracks

Select User Data > Tracks > Saved Tracks.

Editing a Saved Track

Select User Data > Tracks > Saved Tracks.
Select a track.
Select Edit Track.
Select an option:

• Select Name, and enter the new name.
• Select Track Color, and select a color.

Saving a Track as a Route

Select User Data > Tracks > Saved Tracks.
Select a track.
Select Edit Track > Save As > Save as Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you must record and save at least one track 
(

Saving the Active Track, page 25

).

Select User Data > Tracks > Saved Tracks.
Select a track.
Select Follow Track.
Select an option:

• To navigate the track from the starting point used when the track was created, select Forward.
• To navigate the track from the destination point used when the track was created, select Backward.

Review the course indicated by the colored line.
Follow the line along each leg in the route, steering to avoid land, shallow water, and other obstacles.

Deleting a Saved Track

Select User Data > Tracks > Saved Tracks.
Select a track.
Select Delete.

Deleting All Saved Tracks

Select User Data > Manage Data > Clear User Data > Saved Tracks.

Navigation with the STRIKER Vivid

25

Summary of Contents for STRIKER Vivid 4










































Reviews: