background image

 

 

Activating and deactivating the alarm 

 
To activate or deactivate the high and low outside temperature alarm, briefly press the 

ALERT

 button.

 

 

When the alarm is activated, the main unit display shows the icon 

 

 

As soon as the set temperature of the upper or lower outdoor temperature limit has been reached, a beep 

sounds and icon 

 or 

 and the temperature value will flash. The beep will repeat every minute.  

You can disable the alarm by pressing the 

ALERT 

button. 

 
 

ALARM CLOCK 

 

Setting of alarm time 

 
The weather station has the possibility to set the alarm for every day (MO-SU) or Monday to Friday (MO-
FR). In the basic display mode, press the 

ALARM

 button at the rear of the main unit and hold for 3 

seconds. The alarm time will be displayed at the time spot and the hour will flash. Use the 

/MEM 

or 

/CF

 buttons to set the required wake-up hour and press 

ALARM 

briefly. Minutes will flash. Use the 

/MEM 

or 

/CF

 button to set the required wake-up minute. Next press of the 

ALARM

 button will flash 

MO-SU or MO-FR.  Use the 

/MEM 

or 

/CF

 buttons to select MO-SU, (wake-up every day), or MO-FR 

(wake-up Monday to Friday). Press 

ALERT

 to confirm and save the setting.

 

The wake-up time can be shown in the basic display by briefly pressing the 

ALARM

 button.  The current 

time will reappear automatically after 20 s or after pressing of the 

SET 

button briefly. 

 
Activating and deactivating the alarm clock 

 

Press the 

ALARM

 button briefly in the basic display mode to show the wake-up time.

  Press again to 

activate the alarm, the icon 

 will show together with the selected alarm mode MO-SU or MO-FR; press 

again to deactivate the alarm. The icon 

 and the selected alarm mode MO-SU / MO-FR will not be 

displayed. 

 

Turning off alarm signal, Snooze function 

 

As soon as the alarm signal is activated at the preset time, icon 

starts flashing. Press the 

 

button to move the alarm time by 5 minutes (Snooze).  The alarm signal will be terminated and reactivated 

in 5 minutes. The icon 

 and 

Z

Z

 will flash on the display. 

 This function can be terminated at any time by pressing 

any button except 

. If you do not want the Snooze function, press the any button except 

to disable the alarm signal. Icon 

 

stops flashing and the next alarm will be activated in 24 

hours.  
 
If no button is pressed, the alarm signal will be turned off automatically after 2 minutes. 

 

WEATHER FORECAST 

 
The forecast is based on the change in barometric pressure, generally speaking when the barometric 
pressure rises, the weather improves and vice versa. The weather forecast is valid for the next 12 to 24 
hours within  
30 to 50 km with the probability of 70 to 75% 
 
 
 
 
 
 

 

Summary of Contents for 525










Reviews: