background image

 

 

If the signal is not received, the DCF-77 signal reception icon will not appear on the display. If the signal is 

successfully received, the reception icon 

 will be permanently shown on the display. DST means 

daylight saving time. 
 
Search for the DCF-77 signal is done daily at 01:00, 02:00 and 03:00 a.m. If the signal is not successfully 
received at 03:00 a.m., the main unit will search for it at 04:00 and 05:00 a.m. Another search attempt 
occurs the next day at the same time. 
 
To start the search manually, press and hold the 

DOWN

 button for 3 seconds. To exit the search, briefly 

press the 

DOWN 

button. The other buttons are inoperative during the search, except the 

SNOOZE/LIGHT 

buttons. 

 

Note: the DCF-77 signal receiver for time and date setup is integrated into the main unit, therefore  
it is necessary to place the main unit in a way that guarantees good quality reception of the DCF-77 signal. 
Reception of the DCF-77 signal is indicated by the icon on the main unit display. 

 
 

THE WEATHER STATION SETUP 

 
To enter the setup mode, press and hold mode the 

MODE

 button down in the main screen for  

3 seconds. 
 

button 

setting 

steps 

press 

MODE 

for 3 

sec. 

entering the setup mode 

 

setting the time zone 

Press the

 UP 

or 

DOWN 

button to change the time 

zone (the setting for the Czech Republic and 
Slovakia is 00)

 

press 

MODE

 

setting the clock 

Press the 

UP

 button to increase value or 

DOWN

 

to reduce the set value 

press 

MODE

 

setting the minute 

Press the 

UP

 button to increase value or 

DOWN

 

to reduce the set value 

press 

MODE

 

setting the year 

Press the 

UP

 button to increase value or 

DOWN

 

to reduce the set value 

press 

MODE

 

setting the month 

Press the 

UP

 button to increase value or 

DOWN

 

to reduce the set value 

press 

MODE

 

setting the day 

Press the 

UP

 button to increase value or 

DOWN

 

to reduce the set value 

press 

MODE

 

language settings 

Press the 

UP

 or 

DOWN 

button to select the 

desired language 

press 

MODE

 

exit the setup mode 

 

 

Note: By holding down the UP or DOWN button when setting a given value, you will increase or decrease 
this value faster. 
If no button is pressed for 8 seconds, the last set value will be stored and the setting mode will end. 
Languages that can be set: ENG English, GER German, FRE French, ITA Italian, DUT Dutch, SPA Spanish, 
DAN Danish. 
 
Abbreviations of the day's name 
 
 

ENG 

GER 

FRE 

ITA 

DUT 

SPA 

DAN 

Monday 

MON 

MON 

LUN 

LUN 

MAA 

LUN 

MAN 

Tuesday 

TUE 

DIE 

MAR 

MSR 

DIN 

MAR 

TIR 

Wednesday  WED 

MIT 

MER 

MER 

WOE 

MIE 

ONS 

Thursday 

THU 

DON 

JEU 

GIO 

DON 

JUE 

TOR 

Friday 

FRI 

FRE 

VEN 

VEN 

VRI 

VIE 

FRE 

Saturday 

SAT 

SAM 

SAM 

SAD 

ZAT 

SAD 

LOR 

Sunday 

SUN 

SON 

DIM 

DOM 

ZON 

DOM 

SON 

 

Summary of Contents for 560 EASY II











Reviews: