The weather station requires at least 24 hours on acclimatizing to local weather
conditions. The weather station process and analyze the weather patterns for the past
24 hours in order to determine the future weather. Until that time has elapsed, the
predicted weather forecast may not accurately reflect the actual weather for your
immediate area.
The weather station will display the symbols (see fig. 3) to indicate the predicted weather
forecast for the next 12 to 24 hours for an area within a radius of approximately 30-50
km.
Note:
1. Accuracy rate might be lower in extreme weather conditions. The weather
forecast is only for reference only and it is only for domestic use only. Do
NOT
rely on the weather station for weather forecast if any serious matter replies on it
including but not limited to: personal health, life and death situation, any business
or financial decisions, and/or agricultural planning.
2. The weather forecast does not display the current weather. It displays the
weather for the future.
Glowing weather icons
Lit weather forecast icons will glow from dim to bright and back to dim at a regular
interval.
Adjusting the weather station:
1. Press
HISTORY
button (2) for 3 seconds until a beep sound is heard.
2. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to toggle between absolute
“ABS”
and relative
“REL” atmospheric pressure.
3. Press
HISTORY
button (2) to confirm.
4. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to toggle between atmospheric
pressure units of Pascal (hPa) to inch of mercury (inHg)
5. Press
HISTORY
button (2) to confirm.
6. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to change the sea level closest to
your location. The sea level units are in meters (1 meter equals approximately
3.28 feet). Contact your local weather bureaus or authorities for more information.
7. Press
HISTORY
button (2) to confirm sea level.
8. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to change the current weather
situation of your location. See fig. 3 above for the weather pattern that is
resembles your immediate area.
9. Press
HISTORY
button (2) to confirm.
Reading Pressure trend:
1. Recorded memory of the barometric pressure changes are displayed with 3
arrows to show pressure trend.
Note:
It is only possible to measure the barometric pressure trend properly when
