background image

the unit remains at the same altitude. When moving around at different 
altitudes within a short period of time, the air pressure and the barometric 
pressure will change. The pressure trend will only be correct and regulate 
the has remain at a constant altitude for 24 hours or more.

 

 
To recall recorded pressure history reading 

The barometric pressure reading is recorded at an hourly interval and can be recalled 
and displayed up to previous 12 hours. 
Press HISTORY button (2) repeatedly to view pressure recorded in the past hours. 

-1 

HR

 indicates the pressure of the previous hour. The pressure reading history will appear 

for 20 seconds before the current pressure returns.

 

 
RCC Synchronization: 

Where ever available, this clock will automatically synchronize with the radio control 
towers at the following time: 02:00, 03:00, 04:00, 05:00. 
 
User may also manually synchronize the clock by following the instructions below. 

Press and hold down the 

-/ RCC

 button (4) for approximately 3 seconds until 

 is 

flashing. 
When this signal is flashing, the clock is attempting to synchronize with the radio control. 

will flash when a strong signal is received and the clock will synchronize with the 

radio control. This process can take up to 7 minutes. 

will stop flashing and will be 

displayed once the signal is received and in synchronization. 

will not be displayed if the clock is not able to synchronize within this period of 

time. User may manually synchronize again at a later time or the clock will automatically 
attempts to synchronize at the above mentioned time. 
When the clock is attempting to synchronize, press down the 

-/ RCC

 button (4) to cancel 

RCC synchronization. 
 
Please note all other clock/ weather station settings seize to function when the clock is in 
RCC synchronization mode. Wait until the clock is no longer attempting to synchronize 
or it is synchronized to set other clock and weather station function.  
 
If the alarm goes off during synchronization mode, RCC synchronization will seize 
immediately. Follow the above instructions again to set synchronization.  
 

Successful reception or failed reception 

When 

is only shown, the DCF time cannot be received in this location. 

When 

is mostly shown and changes to 

frequently, it is very unlikely that the 

DCF time can be received in this location. 

Summary of Contents for WS6650










Reviews: