When
is mostly shown with occasional
, it is very likely that the DCF time can
be received in this location.
When
is only shown, it is very likely that the DCF time can be received in this
location.
RCC Zone offset
This clock is equipped with radio controlled time adjustment. The user will need to work
out the time zone signal they receive at their current location and make (any) adjustment
as required. This function also allows for daylight saving adjustment. Contact your local
weather bureaus or authorities for more information.
Press
-/ RCC
button (4) once for +1 time zone.
Press
-/ RCC
button (4) once again for +2 time zone.
Press
-/ RCC
button (4) once again for -1 time zone.
Press
-/ RCC
button (4) once again for same time zone.
To set time manually:
Hold down the
MODE/ SET
button (3) for approximately 3 seconds until the display is
flashing.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
toggle between AM / PM and 24-hour clock
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the hour setting.
Press
MODE/ SET
button (3) again. Press Press
-/ RCC
button (4) or
+/ C/ F
button (5)
to change the minute setting.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the year setting.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the month/date and date/month setting.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the month setting.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the date setting.
Press
MODE/ SET
button (3) again. Press
-/ RCC
button (4) or
+/ C/ F
button (5) to
change the weekday language setting.
ENG for English; GE for German; IT for Italian; FR for French; NE for Dutch; ES for
Spanish; DA for Danish
Press
MODE/ SET
button (3) again to confirm settings. Display will no longer flash.
To see alarm time:
Press
MODE/ SET
button (3) once and alarm time 1 will be shown as indicated by
AL
.
Press
MODE/ SET
button (3) again and the current time will be shown.
To set alarm time:
Press
MODE/ SET
button (3) once and alarm time will be shown as indicated by
AL
.
Press and hold
MODE/ SET
button (3) for approximately 3 seconds until the digits flash.
Press
-/ RCC
button (4) or
+/ C/ F
button (5) to change the hour setting.
Press
MODE/ SET
button (3) again.