Each LS4 station is pre-programmed from factory and
tested according to the specification from customer. There
is no need for any programming or setup by installer
during installation.
Plan the installation site carefully so that the risk of being
hit by vehicles is minimized.
Each LS4 station is individually marked with a unique
“M-number” so that the installer can identify each LS4
station. The M-number label is located at upper right
hand side corner behind the front door. When contacting
GARO support, please have the M-number available.
LS4 stations that are pre-configurated for backend-
solution have the ChargeBoxID (CBID) labeled under the
M-number label.
GENERAL INFORMATION
Manual
LS4
Keys
Cable holder
2 x
INFORMATION
CONTENT
Incorrect installation and testing of the LS4 could
potentially damage either the vehicle and/or the LS4
itself.
Poor quality electricity may harm the LS4 and or the
vehicle. An example of such source of poor quality
electricity may be private power generators.
Do not operate the LS4 in temperatures outside its
operating range – see technical specifications.
CAUTIONS
4
EN
