ACE 350™ 11
Mode
—Indicates which of the five detection modes (Zero,
Jewelry, Custom, Relics or Coins) has been selected by
highlighting the corresponding word on the LCD screen.
Target ID Legend
—Works in conjunction with the Target ID
Cursor to indicate a target's probable identity. Ferrous (iron)
targets will indicate on the left half, non-ferrous targets that
are thin or have low conductivity will indicate in the middle,
and thick or high conductivity targets will indicate at the right.
Target ID Cursor (Upper Scale)
—The Target ID cursor, in
conjunction with the Target ID Legend, indicates the probable
identity of a detected target. The upper scale consists of
twelve (12) graphic segments for Target ID.
Lower Scale
—The lower scale, or Notch Discrimination
Scale, indicates the discrimination pattern. The
ACE 350
will
produce an audible target response for the pixels that are
switched on, and no audible response for those that have
been switched off. The Target ID Cursor will always indicate
all targets.
The discrimination pattern can be adjusted by changing
modes and/or using the DISCRIM and Accept/Reject (
/X)
pushbuttons
(see page 16)
.
Coin Depth Indicator
—The depth of a coin, or similar sized
target, is indicated in 2-inch increments. Sweep over the
target with the searchcoil 1 inch from the soil to get the most
accurate reading. Note: targets
larger
than a coin may display
shallower than actual depth while targets
smaller
than a coin
may display deeper than actual depth.
Summary of Contents for ACE 350
