24 Garrett Metal Detectors
BENCH TESTS
You should conduct bench tests to become more familiar
with your detector’s operation. To conduct a bench test:
1. Place the searchcoil on a flat, non-metallic surface that is
several feet from other metallic objects.
2. Select the ZERO mode.
3. Pass various metal objects (coins, bottle caps, nails, etc.)
across the searchcoil at a distance of 3 to 4 inches. Your
metal detector will audibly and visually identify the target.
4. Perform this test in all the modes available on your
detector. Observe the sounds as well as the graphics on
the LCD that are made in each mode.
5. Record the results of your bench tests and refer to them
when hunting in the field.
Summary of Contents for ACE 350
