CSI Pro™ 23
SEARCH mODES
The
CSI Pro
includes two detection modes: a CUSTOm
Discrimination pattern and a ZERO Discrimination pattern.
Use the CUSTOm mode to quickly begin searching with a
discrimination pattern that has been previously defined
and saved by the operator. Use the ZERO mode to detect
all metallic targets present and to add only as much Iron
Discrimination and Notch Discrimination as desired.
Press the Mode button to change modes
.
In either of the two modes, the
CSI Pro
's searchcoil must be
in motion to detect targets. Truly static detection is possible
while using the detector's Pinpoint pushbutton.
•
CUSTOM Mode
This mode can be customized by the operator
and the
CSI Pro
will retain the changes when the
detector is switched off. The factory preset for the
CUSTOm mode (see above) is designed to detect
every type of metal. All 12 discrimination pixels are
switched on and High Res Iron Discrimination is set
to 0 (zero)—indicating that no metal targets have
been eliminated.
Begin with this discrimination pattern and then
use IRON DISC and NOTCH DISC pushbuttons to
customize the discrimination settings. Changes
Summary of Contents for CSI PRO
Page 3: ...2 Garrett Metal Detectors...
