6
Instructions
• Power On/Off
—Press and hold power button ( ) for 1 second to switch
ON or OFF. Note: WT-1 will switch on when it receives detector audio.
Modules will automatically switch off after 10 minutes without a paired
mate, or after 30 minutes of inactivity.
• Pairing
—Switch receiver on, bring within 3 feet (1 meter) of WT-1
(TX module), and then quickly press and release the power button
on the WT-1. Steady pairing indicators on both units indicates
the units are properly paired. The modules will remain paired until you
choose to pair them with another Z-Lynk device.
• Recharging
—Plug the supplied charging cables into the module and
any standard USB port to recharge.
• LED Indicators
—Battery indicator ( ) begins blinking when there are
approximately 3 hours remaining. Battery indicator LED displays solid light
while charging and is off when complete.
Pairing indicator ( ) will blink slowly when not paired; will blink quickly
during pairing search; and will remain steady when paired.
• Caution
—The WT-1 unit will tolerate heavy rain. Z-Lynk modules should
never be submerged.
1539700.B.ZLynk_TX_manual.indd 6
7/5/2017 12:55:34 PM
Summary of Contents for WT-1
