C
HAPTER
1 -
Introduction
Pinouts
DS2000-IFR Installation and Maintenance Guide
1 - 8
1.4
P
INOUTS
The
DS2000-IFR
provides one or more of the following port types: WAN, Ethernet, Serial, and one Async
port (Port 6) used for local connections to the
DS2000-IFR
to access the management software. The
following paragraphs describe the types of connectors used and the Tables referenced with each connector
type detail the pinouts for each connector type. Included with the Console port table is a description of a null
modem crossover cable. If you are connecting to the Console port and using terminal emulation to access the
device a null modem cable is required.
Location/Port Name
Connection
Type
Port Type
Pinout Table
Reference
Ports E1 through E8 (as populated)
and E0
RJ45
Ethernet
Table 1-5
Ports E7 and E8 (optional SFP for 10/100 Mbps
fiber optic ports)
LC
Ethernet
Table 1-6
Ports E9 and E10 (optional SFP for Gbps fiber optic
ports)
LC
Ethernet
Table 1-6
S1 through S16
RJ45
Serial
Table 1-7
W1 and W2 DDS 56/65 Kbps
RJ48
WAN
Table 1-8
W1 and W2 T1/E1
RJ48
WAN
Table 1-9
RS232 (DEBUG)
DB15
Maintenance Port
Not used
AUX1
RJ45
Maintenance
Not used
S0
RJ69
Serial
Table 1-10
CON (console port)
RJ45
Serial
Table 1-11
AUX 2
DB15
Maintenance
Not used
Table 1-5. Ethernet Port - RJ45
Pin
Signal
1
Tr
2
Transmit -
3
R
4
Not Used
5
Not Used
6
Receive -
7
Not Used
8
Not Used
Pin 8
Pin 1
Summary of Contents for DynaStar DS2000-IFR
Page 2: ......
