Magnum 10ETS / 10XTS Installation and User Guide
06/12
19
www GarrettCom com
.
.
3.3 Mounting
The
Magnum 10ETS/XTS Terminal Server can be easily mounted on a table-
top or any suitable horizontal surface. They have four rubber feet to provide stability
without scratching finished surfaces.
3.3.1 Rack-mounting
options
Installation of a Magnum 10ETS/XTS in a 19” rack is a simple procedure. The
units are 1U (1.74”) high. When properly installed, the front-mounted LED status
indicators should be in plain view and easy to read.
Rack-mount installation requires special 19” rack-mounted brackets and screws
(included with each Magnum 10ETS/XTS unit). These brackets attach to the each side of
the Switch which is then typically fastened into a standard 19” RETMA rack.
3.3.2 Rack-mounting,
Reverse mount option
The optional Reverse Magnum 10ETSR/10XTSR model has all of the cabling
(Ethernet, Serial, and Power) connectors in the rear, and the status LEDs and console
port in the front. The status LEDs that are co-incident with the ports are still present and
a second or dual set of LEDs are used for status visibility in the front of the unit, showing
the same data.