Magnum 10ETS / 10XTS Installation and User Guide
06/12
22
www GarrettCom com
.
.
3.4
Powering the Magnum 10ETS/XTS Terminal Server
The Magnum 10ETS/XTS is available with the choice of Dual Hot-Swappable
power supplies or a single fixed (non Hot-Swappable) internal power supply.
The Hot-Swappable power supplies are available with 90-250V AC/DC and
24/48V DC power inputs. They are normally used as matching pairs.
The fixed internal power supply is available with 90-250V AC/DC, 24/48V DC
and AC 100-240V (via IEC connector) power inputs.
When connecting the Ethernet or Serial cabling, there is no need to power
down the unit. Individual cable segments can be connected or disconnected without
concern for power-related problems or damage to the unit.
(see Section 1.2, for Ordering Information)
3.4.1
Power Input connection
Fig 3.4.1a AC/DC power input
PS1 (Power Supply 1)
Pin 1: - (Negative)/N
Pin 2: + (Positive)/L
Pin 3: Ground
PS2 (Power Supply 2)
Pin 4: Ground
Pin 5: - (Negative)/N
Pin 6: + (Positive)/L
Fig 3.4.1b AC power input
Connection made via IEC 320/C14 3-
prong male connector
Pin 1
Pin 6
Chassis
Ground
Chassis Ground
