Magnum 10ETS / 10XTS Installation and User Guide
06/12
41
www GarrettCom com
.
.
5.1.9
10K4-MTRJ, four Multimode MTRJ (use in Slot C)
The 10K4-MTRJ four-port fiber module provides four 100Mb Multimode
MTRJ Fiber ports.
The 10K4-MTRJ fiber port is a Small Form Factor (SFF) MTRJ Multimode
connector. The MTRJ’s small size and ease of connection make it a good choice for
100Mbps “fiber-to-the-desktop” Ethernet connectivity. When installed in a Magnum
10ETS/XTS, it supports fiber optic cable distances up to the IEEE-standard 100Mbps
distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.
The cable end is a “plug-in” connector with both fiber strands terminated in
one housing that cannot be improperly inserted. Each port has a Link/Activity (L/A)
LED indicating proper connectivity (Link) with the remote device when lit and blinking
(Activity), indicating packets being received.
5.1.10 10K2-MSC, 10K2-MST (use in Slot C)
Two SC Multimode or two ST Multimode
The 10K2-MSC (shown) two-port fiber module provides two 100Mb
Multimode SC Fiber ports. This option utilizes a SC-type “push-pull” fiber optic
connection.
The 10K2-MST two-port fiber module provides two 100Mb Multimode ST
Fiber ports. This option utilizes a ST-type “twist-lock” fiber optic connection.
The 100Mb Multimode SC and ST ports typically support fiber optic cable
distances up to the IEEE standard 100Mbps distance limits, typically 2km at full-duplex.
Each port has a Link/Activity (L/A) LED indicating proper connectivity (Link)
with the remote device when lit and blinking (Activity), indicating packets being
received.
