Magnum 10ETS / 10XTS Installation and User Guide
06/12
49
www GarrettCom com
.
.
APPENDIX B: Removal / Installation of the Hot-Swap power supply
Tools Required:
1
#1 Phillips head screwdriver
Step 1:
Locate the Hot-Swap power supply locking screw.
Loosen the locking screw until no longer engaged.
Step 2:
Lift the Hot-Swap power supply handle (shown above) to disengage from the
10ETS/XTS
chassis.
Step 3:
Slide out the power supply from the chassis. For installation, reverse the order.
PS1
PS2