M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
152
STP CONFIGURATION
-----------------
Spanning Tree Enabled(Global) : YES
Spanning Tree Enabled(Ports) : YES, 9,10,11,12,13,14,15,16
Protocol
: Normal STP
Bridge ID
: 80:00:00:20:06:25:ed:80
Bridge Priority
: 32768
Bridge Forward Delay
: 15
Bridge Hello Time
: 2
Bridge Max Age
: 20
Root Port
: 0
Root Path Cost
: 0
Designated Root
: 80
:00:00:20:06:25:ed:80
Designated Root Priority
: 32
768
Root Bridge Forward Delay
: 15
Root Bridge Hello Time
: 2
Root Bridge Max Age
: 20
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global) : NO
Magnum6K25(stp)##
show stp ports
STP Port Configuration
--------------------------------------------------------------------------------------------------------------------------
Port# Type
Priority
Path
Cost State
Des. Bridge
Des. Port
--------------------------------------------------------------------------------------------------------------------------
09 TP(10/1
128
100
Forwarding 80:00:00:20:
80:09
00)
06:25:ed:80
10 TP(10/100)
128
100
Disabled 80:00:00:20:06:25:ed:80 80:0a
11 TP(10/100) 128
100
Disabled 80:00:00:20:06:25:ed:80 80:0b
12 TP(10/100) 128
100
Disabled 80:00:00:20:06:25:ed:80 80:0c
13 TP(10/100)
128
19
Forwarding 80:00:00:20:06:25:ed:80 80:0d
14
TP(10/100 128
100
Disabled 80:00:00:20:06:25:ed:80 80:0e
15 TP(10/100) 128
100
Disabled 80:00:00:20:06:25:ed:80 80:0f
16
TP(10/100) 128
100
Disabled 80:00:00:20:06:25:ed:80 80:10
Magnum6K25(stp)##
F
IGURE
85
–
Enabling STP
ber|list|range>] value=<0-255 | 0-65535> -
specifies the
port or switch level priority. When a port(s) are specified the priority is associated with ports and
Syntax
c
pecified
P process. These ports typically would be end-stations. If you are not
Syntax
t
es
Syntax
priority [port=<num
their value is 0-255. If no ports are specified, then the switch (bridge) priority is specified and its
value is 0-65535
ost port=<number|list|range> value=<0-65535>
- cost is specific to a port and the
port(s) have to be s
Syntax
port port=<number|list|range> status=<enable|disable>
- specific ports may
not need to participate in ST
sure – let MNS-6K software make the decisions
imers forward-delay=<4-30> hello=<1-10> age=<6-160>
- change the STP
Forward Delay, Hello timer and Aging timer valu
