manualshive.com logo in svg

GarrettCom MNS-6K 4.1.4, Cli User'S Manual

The GarrettCom MNS-6K 4.1.4 product comes with a CLI User's Manual for easy configuration and management. You can download the manual for free from 88.208.23.73:8080 to learn how to maximize the features and capabilities of this device. Ensure smooth operation by accessing the manual for guidance.

Share
Download
background image

M A G N U M   6 K   S W I T C H E S ,     M N S - 6 K   U S E R   G U I D E  
 

 

Magnum6K25(rstp)## 

priority port=13 value=100

 

 

Magnum6K25(rstp)## 

show rstp ports

 

 

 

RSTP Port Configuration 
 
----------------------------------------------------------------------------------------------------------------- 
Port#      Type       Priority  Path Cost    State     

  Des. Bridge                 Des. Port 

---------------------------------------------------------------------------------------------------------------- 
09      TP(10/100)  128   2000000       Forwarding   00:00:00:20:06:25:ed:89   00:09 
10      TP(10/100)  128   2000000       Disabled                            

       00:0a 

11      TP(10/100)  128   2000000       Disabled                            

       00:0b 

12      TP(10/100)  128   2000000       Disabled                            

       00:0c 

13      TP(10/100)  100   200000         Forwarding   00:00:00:20:06:25:ed:89  00:0d 
14      TP(10/100)  128   2000000       Disabled                            

       00:0e 

15      TP(10/100)  128   2000000       Disabled                            

       00:0f 

16      TP(10/100)  128   2000000       Disabled                            

       00:10 

 

Magnum6K25(rstp)## 

cost port=13 value=250000

 

 

Magnum6K25(rstp)## 

show rstp ports

 

 

 

RSTP Port Configuration 
 
-------------------------------------------------------------------------------------------------------------- 
Port#      Type       Priority  Path Cost    State     

  Des. Bridge                Des. Port 

------------------------------------------------------------------------------------------------------------- 
09      TP(10/100)  128   2000000       Forwarding  00:00:00:20:06:25:ed:89  00:09 
10      TP(10/100)  128   2000000       Disabled                            

      00:0a 

11      TP(10/100)  128   2000000       Disabled                            

      00:0b 

12      TP(10/100)  128   2000000       Disabled                            

      00:0c 

13      TP(10/100)  100   250000         Forwarding   00:00:00:20:06:25:ed:89  00:0d 
14      TP(10/100)  128   2000000       Disabled                            

      00:0e 

15      TP(10/100)  128   2000000       Disabled                            

      00:0f 

16      TP(10/100)  128   2000000       Disabled                            

      00:10 

 

Magnum6K25(rstp)## 

port port=9 status=disable

 

 

Magnum6K25(rstp)## 

show rstp ports

 

 

RSTP Port Configuration 
 
-------------------------------------------------------------------------------------------------------------- 
Port#      Type       Priority  Path Cost    State     

  Des. Bridge              Des. Port 

------------------------------------------------------------------------------------------------------------- 
09      TP(10/100)  128   2000000     NO STP                                                 00:09 
10      TP(10/100)  128   2000000     Disabled                            

     00:0a 

11      TP(10/100)  128   2000000     Disabled                            

     00:0b 

12      TP(10/100)  128   2000000     Disabled                            

     00:0c 

13      TP(10/100)  100   250000       Forwarding    00:00:00:20:06:25:ed:89 00:0d 
14      TP(10/100)  128   2000000     Disabled                            

     00:0e 

15      TP(10/100)  128   2000000     Disabled                            

     00:0f 

170

 

Summary of Contents for MNS-6K 4.1.4













































































































































































































































































































































































Reviews:

No comments

Related manuals for MNS-6K 4.1.4

Barracuda Networks NG Network Access Client SP4 Administrator'S Manual preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 268
TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
Valcom VIP-102B Configuration Manual preview
VIP-102B
Brand: Valcom Pages: 5
TANDBERG Compliance Appliance Deployment Manual preview
Compliance Appliance
Brand: TANDBERG Pages: 41
F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61... Administrator'S Manual preview
INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...
Brand: F-SECURE Pages: 414
ScanSoft TextBridge PRO 8.5 User Manual preview
TextBridge PRO 8.5
Brand: ScanSoft Pages: 243
KAPERSKY ANTI-VIRUS 5.5 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 134
Aruba Networks ClearPass Guest 3.9 Deployment Manual preview
ClearPass Guest 3.9
Brand: Aruba Networks Pages: 518
Altigen MultiSite Configurator Configuration Manual preview
MultiSite Configurator
Brand: Altigen Pages: 10
Avaya CPSEE_TSP500 User Manual preview
CPSEE_TSP500
Brand: Avaya Pages: 216
F-SECURE Internet Gatekeeper Administrator'S Manual preview
Internet Gatekeeper
Brand: F-SECURE Pages: 414
Primera SureThing User Manual preview
SureThing
Brand: Primera Pages: 48
Ulead BD DISCRECORDER 2.7 User Manual preview
BD DISCRECORDER 2.7
Brand: Ulead Pages: 19
Avaya PARTNER ACS PC Administration Getting Started Manual preview
PARTNER ACS PC Administration
Brand: Avaya Pages: 56
Avaya P120 SMON User Manual preview
P120 SMON
Brand: Avaya Pages: 61
ViewSonic MultiView Datasheet preview
MultiView
Brand: ViewSonic Pages: 2
Intel 512AN_HMW User Manual preview
512AN_HMW
Brand: Intel Pages: 212
Autodesk ALIAS SURFACE Brochure preview
ALIAS SURFACE
Brand: Autodesk Pages: 10

Brands by name

Popular brands

Load more brands