M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
bootcfg=<enable|disable>
- valid with type=bootp only. This option allows the switch
to load the configuration file from the BootP server. This is useful when a new switch
is put on a network and the specific configurations are loaded from a centralized
BootP server
Syntax
telnet <enable|disable>
- enables or disables telnet sessions
Syntax
telnet <ipaddress> [port=<port number>]
– telnet from the switch
Syntax
ssh <enable|disable|keygen>
-
enable or disable the server. Also can be used for generating the
key used by ssh
Syntax
ssh port=<port|default>
- select a different port number for SSH communication
Syntax
show ssh
– display the ssh settings
Syntax
set dns [server=<ip>] [domain=<domain name>] <enable|disable|clear>
- specify
a DNS server to look up domain names. The sever IP can be a IPV6 address as well as an IPV4
address
Syntax
show dns –
display the DNS settings
Syntax
set serial [baud=<rate>] [data=<5|6|7|8>] [parity=<none|odd|even>]
[stop=<1|1.5|2>] [flowctrl=<none|xonxoff>
]
– sets serial port parameters
Syntax
snmp
– enter the snmp configuration mode
Syntax
setvar [sysname|syscontact|syslocation]=<string>
- sets the system name, contact and
location information
Syntax
set timezone GMT=[+ or -] hour=<0-14> min=<0-59>
- sets the timezone
Syntax
set date year=<2001-2035> month=<1-12> day=<1-31>
[format=<mmddyyyy|ddmmyyyy|yyyymmdd>]
– sets the date and the format in which the
date is displayed
Syntax
set time hour=<0-23> min=<0-59> sec=<0-59>
– sets the time (as well as the timezone)
Syntax
set timeformat format=<12|24>
- sets the display time in the 12/24 hour mode
Syntax
set daylight country=< country name>
- sets the daylight saving time
Syntax
setsntp server = <ipaddress> timeout = <1-10> retry = <1-3>
- setup the SNTP server
Syntax
sync [hour=<0-24>] [min=<0-59>]
– setup the frequency at which the SNTP server is queried
Syntax
sntp [enable|disable]
– enables or disables the SNTP services
283
