M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax
authtrap <enable|disable>
- enables or disables authentication traps generation
Syntax
show-authtrap
- displays the current value of authentication trap status.
Syntax
deftrap community
=<string>
- defines the default community string to be used when sending traps.
When user does not specify the trap community name when setting a trap station using the “trap”
command, the default trap community name is used
Syntax
show-deftrap
- displays the current value of default trap
Syntax
trap <add|delete> id=<id> [type=<v1|v2|inform>] [host=<host-ip>]
[community=<string>] [port=<1-65534>]
-
define the trap and inform manager stations. The
station can receive v1, v2 traps and/or inform notifications. An inform notification is an acknowledgments
that a trap has been received. A user can add up to 5 stations.
Syntax
show-trap [id=<id#>]
- shows the configured trap stations in tabular format - id is optional and is
the number corresponding to the trap entry number in the table
Syntax
com2sec <add|delete> id=<id> [secname=<name>] [source=<source>]
[community=<community>]
- a part of the View based Access control model (VACM) as defined
in RFC 2275. This specifies the mapping from a source/community pair to a security name. On MNS-
6K, up to 10 entries can be specified
Syntax
group <add|delete> id=<id> [groupname=<name>]
[model=<v1|v2c|usm>] [com2secid=<com2sec-id>]
-
a part of the View based Access
control model (VACM) as defined in RFC 2275. This command defines the mapping from sec model or
a sec name to a group. A sec model is one of v1, v2c, or usm. On MNS-6K, up to 10 entries can be
specified
Syntax
show-group [id=<id>]
- display all or specific group entries - id is optional and is the number
corresponding to the group entry number in the table
Syntax
view <add|delete> id=<id> [viewname=<name>] [type=<included|excluded>]
[subtree=<oid>] [mask=<hex-string>]
-
a part of the View based Access control model
(VACM) as defined in RFC 2275. This command defines a manager or group or manager stations
what it can access inside the MIB object tree. On MNS-6K, up to 10 entries can be specified
Syntax
show-view [id=<id>]
- display all or specific view entries - id is optional and is the number
corresponding to the view entry number in the table
Syntax
user <add|delete> id=<id> [username=<name>]
[usertype=<readonly|readwrite>] [authpass=<pass-phrase>]
[privpass=<pass-phrase>] [level=<noauth|auth|priv>] [subtree=<oid>]
for
quickly adding or deleting v3 USM based security, this command adds user entries. MNS-6K allows up
299
