Operating instructions
®
Troubleshooting
15
16
model no.: 046-7247-4
9. Restore factory default
Instruction: After removing the batteries, touch the keypad for three
seconds and re-install the batteries.
When the keypad lights up, press 2, 5, 8, and 0 in any order.
The programming is reset back to the original factory codes
once you hear three long beeps.
Operation Audio Indicators
Successful Operation
Sounds
Meaning
1 Beep
2 Long Beeps
3 Beeps
5 Beeps
10 Rapid Beeps
3 Long Beeps
Successful Programming
Operation Error
Default Setting Restored
Code Input
;
5 Times
System Shuts Down For 45 Seconds
Error After
Low Battery Power
Problem
Possible Cause
Corrective Action
Toll-free Number: 1-800-268-6591
After the installation is
complete and the batteries
are in place, none of the
buttons are responsive.
(No sound, and no backlight.)
Issues with batteries or
the wiring.
Replace the batteries or
make sure the batteries
are installed correctly.
Please check whether the
cable from the interior lock
unit is connected correctly.
When entering
setup of other functions
appears
the
programming code while
, the
error message
after
pressing the confirm button.
(The light blinks three times
with three short beeps.)
door
Function setup
locked.
with the
Unlock the door by turning
the turn-piece from the
interior lock unit or with a
key from the exterior.
The door will not lock after
pressing the button.
The lever or the knob is
turned too early while
the motor is not yet
operating.
Wait for the end of the
motor operating sound
(the keypad light is off),
and then press the button
again to execute the
lockup function.
LIMITED WARRANTY STATEMENTS
The manufacturer warrants the product to be free from defects in material
and workmanship for a period of 12 months from the original date of purchase.
